Email| CN| EN
Product
Contact Us

Tel: (00)86 21 51696870

Fax: (00)86 21 60818967
Web: www.special-metal.com

E-Mail: sales@special-metal.com 

ADD: No.3500, Xiupu Road, Shanghai, China


Slag pot

Slag pot

Slag pot is a load-bearing device whose sole purpose is to collect molten or solid slag generated during metallurgical or chemical processes, to retain it during transport and to deposit it at a place of disposal. 


Slag pot material

We CSM slag pots are made from Cast Steel, which is similar to our ladles, we will offer the material specification as you required. 


                                                        Standard Specifications for Cast Steel

Country                                                      Standard                                                              Grade

United Kingdom                                      BS  3100:1991                                                      425-A2

USA                                                              ASTM A 27                                                              60-30

Germany                                                      DIN 17182                                                              GS-16Mn5

Japan                                                      JIS G7821:2000                                                      SC42

International                                              ISO   3755:1991                                                      230-450


Slag pot design

Slag pots are crucial items as they are part of lifting equipment and therefore undergo in terms of mechanical design engineering and handling the national safety regulations of the state where they are supposed to be operated. Thus, the following design criteria must be taken into consideration:

       Type of furnace that the slag pot will service,

       Quantity and type of slag generated,

       Method of handling and dumping the pot,

       Heat impact during operation,

       Dimensional restrictions,

       Pot maintenance procedures


Slag pot production Process 

1. Wooden pattern Production  

2. Molding

3. Pouring

4. First cleaning

5. Heat treatment – grinding (inspection)

6. Rough machining (inspection)-finishing machining (inspection)

7. Packing-delivering


Slag pot quality assurance

The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000. The standard documentation ensures the full traceability of every process step:

• Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition, mechanical properties and non-destructive examination;

• Dimensional check supported with a “as-built“ sketch;

• Record of the heat treatment chart;

Slag pots designed by CSM comply with the requirements of structure dimensions, mechanical properties and guarantee by chemical composition, heat treatment, non-destructive testing and visual inspection against surface.


Slag pot pictures

slag pot


slag pot


Online